Northwest Fishing

www.northwesternoutdoors.com

Angler

Mark Yuasa

Article Tags

Path

/articles/digging-razor-clams

Five Great Lure for Spring Bass Fishing

Read more about Five Great Lure for Spring Bass Fishing

Body

I love fishing for bass in the Spring! Bass are as big as they are going to get all year and as water temperatures warm and bass prepare to spawn, the bite can be amazing! By early May in the Pacific Northwest, with water temperatures around 60 degrees in many lakes, you can easily catch and release twenty-five bass a day. Here are five lures I love to use in the spring to help me get that done.

FOOTBALL HEAD JIG

A weedless jig is a lure that works all year long. The football head jig can be pitched or flipped into a variety of places bass like to hang out to include under docks, into brushy cover, rocky or gravel areas, beaver huts, flooded timber and the list goes on. I like to use a quarter, 3/8th ounce or half-ounce jig depending on how deep I am fishing.

One way to fish a football jig is to let it hit bottom and then slowly jig it back towards you. Most bites occur as the jig falls back towards the bottom. Another way is to us a sweeping motion with your rod, allowing the jig to drag across the bottom.

I always put a soft plastic trailer on any jig I am fishing with for bass. Good colors to use are black and blue or a green pumpkin.

CHATTERBAIT

A lot of bass anglers swear by the chatterbait for springtime fishing. This bait features a metal blade on top of the jig head that flashes and vibrates through the water. The chatterbait was popularized by Z-Man, and their original Z-Man ChatterBait still catches fish, especially in the spring. Many anglers, me included, let the chatterbait fall to the bottom and then retrieve it at a moderate pace next to brush or weed lines or near woody structure. If that does not work, try a very fast retrieve, even in colder water. That is a tactic Kyle Clark, an avid tournament bass angler and the owner of PNW Fishing Adventures, swears by.

A three-eighth to half-ounce chatterbait is a popular size to fish at depths of 10 feet or less. Popular colors are white, brown/black, black & blue and in stained water, chartreuse.

SENKO

When the bass are on their spawning beds a soft plastic worm called a Senko is hard to beat. This is a shallow water offering and precise casting while sight fishing for bass is a key to success. The number one color to fish is green pumpkin but at times, a purple worm with blue fleck can outshine the green pumpkin. I personally like to fish with a five-inch Berkley Powerbait Senko called The General, because the bass seem to hold onto it longer. However, many other serious bass anglers prefer Senko baits made by Yamamoto.

The Senko should be fished without weight. You can fish it Texas rigged through the nose and watch it slowly fall towards where the bass are. Others will fish it wacky rigged, with a hook right through the middle of the worm. The way a wacky rigged worm falls triggers vicious strikes from bass as it slowly undulates down through the water. Use a #2 or #1 Wacky hook and if you can find ones with wire weed guards that will help prevent some of the snags, you’ll encounter fishing around flooded timber and shrubs.

LIPLESS CRANKBAIT

The lipless crankbait can be fished in cool waters but really starts to prove itself when the water temperature hits 55 degrees. Bill Lewis came out with the original Rat-L-Trap decades ago. This is a hard lure with a slim profile designed to produce a very tight wiggle. BBs inside the lure provide a rattle as the lure is retrieved.

A lipless crankbait is a great search bait because it can be cast a long distance, and you can cover a lot of water looking for schools of largemouth or smallmouth bass. In the latter half of spring (and all the way into autumn) you can fish the lure with either a moderate or rapid retrieve. Very short pauses as you retrieve often trigger strikes. I like to fish this lure along rocky riprap or just outside the edges of cover like flooded willows or weed lines.

A number of companies manufacture lipless crankbaits. In recent years, I have gravitated to the Berkley War Pig. I have a couple of plastic tackle boxes filled with half ounce, three-inch War Pigs in a variety of colors and they have become a true high-confidence lure for me. In the spring red can be a good color or you can match the hatch and try fishing lures that imitate trout, perch, bluegill, or bass.

FROG

Never overlook a soft plastic, weedless frog for springtime bass. They are generally made with a hollow body and have hooks on the back of the body. The “legs” of the frog provide action that attracts bass, and if you have a concave face on your lure, a popping retrieve will often attract even more bass.

This is a lure designed to cast into the weeds or lily pads where you would not dare throw a traditional lure. Jerking the lure on top of the water and weeds can generate strikes from bass that erupt out of the water to smash the lure. The number one mistake most anglers make while fishing frogs is to set the hook too soon. As tempting as it is to set that hook when that bass comes out of the water, you need to wait until you feel the weight of the fish at the end of your line. That is when you set the hook with a hard jerk and begin fighting that bass.

Conventional wisdom says frogs (and other top water lures) fish best in the early morning and in the evening. However, a weedless from is a lure you can really fish all day, especially on a cloudy day.

So, there you go, five great lures to help you catch more bass from March through June (and beyond). Fill your tackle box with these staples and make the most of your day on the water with more hook-ups. You’ll be glad you did.

John Kruse

www.americaoutdoorsradio.com

Article Categories

Featured Image

Angler

John Kruse

Article Tags

Path

/articles/five-great-lure-spring-bass-fishing

Cowlitz River Steelhead Stories

Read more about Cowlitz River Steelhead Stories

Body

The Cowlitz River is truly legendary for its hatchery steelhead run. It is a reliable producer year after year. Many of us here in the Northwest, myself included, caught our first steelhead out of this river. I'll never forget seeing my bobber go down and watching in awe as a 17-pound steelhead exploded out of the water.

My heart was pounding as I fought to hold on while it furiously tried to shake my lure. It was an unforgettable experience that motivated me to return each year. For better or for worse, steelhead can be tricky to figure out. This is what makes them so sought after and rewarding to catch. A bit of preparation and extra knowledge on your side might just be what tips the scales in your favor. Let's take a look at how to have a more successful trip to the Cowlitz River.

Tackle Tips

Like all fisheries, your first step will be gearing up. All traditional steelhead methods will produce fish on the Cowlitz, depending on the day. You will see plunkers, drift fishermen, and bobber fishermen. Plunkers will generally throw Spin N Glo's baited with shrimp and/or eggs, or plugs. Drift/bobber fishermen use bait, yarnies, jigs, or beads.

I will usually bring 2 or 3 rods so I can use multiple techniques without wasting time on the water retying. Experiment with all these different techniques and see what you like. Each technique has its advantages.

Plunking can be extremely effective because you can target moving fish. Beads are becoming more and more popular because they are a small, natural presentation that works well when fish aren't aggressively biting. Jigs are extremely versatile and eye-catching, especially for fresh fish. Vary up your technique and pay attention to what's working for other anglers as well.

Regardless of technique, it certainly helps to start by arming yourself with knowledge about the species you're targeting. Steelhead are clever and wary. Keep this in mind, even when choosing something as simple as your leader line. Use clear bobbers and light line, preferably fluorocarbon.

Your presentation should be as invisible as possible. Part of the challenge of steelhead fishing is finding the right balance of gear that won't spook the fish but also won't break from a thrashing, jumping fish. Steelhead put up a tough and acrobatic fight. Practice tying your knots before heading out, they will be put to the test.

River conditions are also critical to keep in mind. When the water is low and clear, use small presentations. When it is high and murky, use large presentations. I always recommend having some hardware in your tackle box.

Spinners and spoons can sometimes entice fish that won't bite jigs or beads. Their flash will attract fish from far away. It's a quick and efficient way to work a large amount of water if you aren't sure where fish are holding.

Try fishing seams between fast and slow water. Steelhead also love to hang out around rocks. Read the water and think like a fish. Try a variety of angles and retrieve speeds. If you're using a bobber, you can play with the depth of your presentation. I'd recommend changing up your lure often, even if it's just changing colors. Part of the fun is just changing up your strategy.

Locations

Whether you're fishing from a boat or on shore, Blue Creek will likely be your destination. It is the focus for most steelhead anglers. Blue Creek Boat Ramp can launch two boats at a time and has a large parking lot.

Like most rivers, the Cowlitz is best fished from a boat. It's wide and deep enough that jet sleds are very common, but you will see some drift boats. That isn't to say that bank anglers won't have success. There is plenty of shore access around Blue Creek. If needed, there is an ADA wheelchair-accessible platform near the fish hatchery, relocated from its previous spot in Blue Creek.

If you've never been to Blue Creek, be warned. When the fishing is hot, it gets crowded. Be prepared to hike or wade a bit if you're looking to get some peace and quiet. If you're traveling from afar and need accommodations, Centralia or Mossyrock are probably your best bets. There are good restaurants and hotels in both cities.

As always, check the rules and regulations before heading out. The Cowlitz is subject to emergency rule changes. It's a good idea to check Tacoma Power's website to see the current water visibility and flow. Preparation is key, especially if it's a long drive for you. Good luck out there!

Article Categories

Angler

Hannah Pennebaker

Article Tags

Path

/articles/cowlitz-river-steelhead-stories

Drill Baby Drill

Read more about Drill Baby Drill

Body

The evolution of an ice fisherman parallels that of other angling pursuits in many similar ways. There are the initial baby steps, followed by a slow, but steady progression down the uneven road of knowledge. Over the course of time and experimentation, the neophyte grows in understanding of his craft, with the final result being a functioning ice fisherman, capable of venturing out and having a modicum of success.

My journey, I imagine, is not much different from any others. I’ve reached the point where the “watch one, do one, teach one” adage of my nursing profession gives me the credentials to share a little knowledge with readers new to ice fishing.

If you are at the beginner stage of ice fishing, one of the things that may make you scratch your head and seek advice, are the various options of creating a hole in the ice to actually fish. There’s more than one way to drill a hole, so let’s run down some of your options before sinking too much money into an unproductive “hole”.

First, the “caveman” approach. For this technique, you’ll need a hammer. Yes, you’re reading my mind. With a hammer, you can break through previously drilled holes. The advanced hammer technique would be to bring a large chisel and hammer. Before the seasoned ice anglers laugh too much – this technique does work. The problem is it requires a lot of work! And finding relatively fresh holes to open. A variation of this technique is to use a Spud Bar, a full-size 6-foot pole with a hardened blade on the end of it. Again, it will work and as a bonus give you a nice cardio workout to boot. I predict you will quickly move up the ladder to more refined hole drilling methods.

Handheld augers have several advantages for new anglers. First and most importantly, they work. Second, they are an affordable solution if you’re on a budget or still at that phase of deciding how deeply you want to plunge into this winter sport. Third, they are carbon neutral (and as such the State of Washington should give its users a tax break…). Finally, they are also a great cardio workout. That said, when my 33-year-old strapping son tells me it’s a lot of work, as a new Social-Security-receiving citizen, I know I can pass on manual ice augers.

Which brings us to power augers. Our ancestors didn’t conquer fire for nothing!

As you explore the world of powered ice augers you’ll find three different styles, all of which work and each of which have their own advantages and disadvantages.

First, let’s look at the electric drill ice auger. Electric augers have a couple of nice advantages. First, they are not as noisy as gas augers. That’s important to some of us who value the peace and quiet of ice fishing, not to mention not scaring fish. Second, they tend to be lighter than gas augers. As you get more into ice fishing, you’re going to find your sled filling up with more “essential stuff”. Having a lighter ice auger means you can carry other “stuff”, i.e. crap. Electric ice augers can be further broken down into two subsets – self-contained augers and drill-attached augers. The self-contained have everything you need to start drilling. The electric drill auger requires a separate drill that attaches to the auger, and batteries to run it. This drill should be brushless for longevity and should have a minimal amount of power available, around 700-inch pounds with an ½ inch drill chuck and at least a 4amp battery. An underpowered drill will not get the job done and will likely destroy the drill in short order.

Electric drill ice augers work, and many people use them. That said, they have a big negative: batteries. Drilling a 6” deep hole is a piece of cake, but when you get into 12-18” of ice be prepared for a slower process, and more importantly, rapidly depleting batteries. Today’s batteries do not like cold weather and require that you bring several extra batteries. That adds both cost and weight to the equation. These batteries aren’t cheap.

The newer self-contained electric drills are lighter than gas, and the batteries last longer. They are also more powerful than most electric drill augers. However, they are also pricey, costing upwards of double the price of a gas-powered auger.

Both hand-powered and electric augers lead us to another disadvantage – less opportunity to drill more holes and move around. When that battery is done, it’s done. This brings us to the next ice augers class.

Gas-powered ice augers give anglers a tool that doesn’t limit one’s day of drilling. With a tankful of gas, you’ll be able to “run and gun” with the best of them. Drilling holes is easy and fast. The negatives of gas augers are the weight, the sound, and the odor. A variation on the gas auger is a propane auger. The only disadvantage I’ve heard about propane is that the bottles can freeze up in colder temperatures. Gas augers also can have issues with reliability and starting and require routine maintenance to be in top working order. The noise of a gas drill can spook fish as well.

I used an electric drill auger last year, and while it did the job, I was frustrated by the slow drilling and the depleted battery issue. After finding a lighter-weight (26-pound) gas auger on sale recently, I pulled the trigger. I’m excited to give it a try, especially on those 12-18” thick lakes and reservoirs.

As you can see, there are several options for drilling holes in the ice, each with its own set of advantages and disadvantages. It boils down to personal preference and cost.

Whichever route you go, stay warm and safe on the ice!

Article Categories

Featured Image

Angler

Mike Carey

Article Tags

Path

/articles/drill-baby-drill

Five Ice Fishing Destinations in Montana

Read more about Five Ice Fishing Destinations in Montana

Body

Why stop fishing just because it’s not flip-flops and t-shirt weather? The seasons may change, and the boat may be winterized and put away for storage, but that doesn’t mean we have to stop our fishing adventures. On the contrary, there is something to say about the hard water fishing experience when the temperatures drop. Here in Montana, ice fishing is just another part of the ebb and flow of the outdoor lifestyle many residents share and love. Candidly, I have not ice-fished on these bodies of water, yet. I have, however, fished most of them and we even have several episodes at a few of the mentioned locations with future plans to highlight the other fisheries! Without further ado, here's a detailed exploration of five fantastic ice-fishing spots in Montana. Let's dive into each location to understand why they're great choices for ice fishing enthusiasts.

1. Fort Peck Reservoir

Fort Peck Reservoir is a premier destination for ice fishing in Montana. This massive reservoir stretches across more than 245,000 acres, making it one of the largest bodies of water in the state. The reservoir's vast size provides a diverse habitat that supports a variety of fish species, including northern pike, walleye, lake trout, and smallmouth bass. You may recall a chinook salmon episode filmed in the late summer with the NWF crew and Shelby Ross of Ross Outdoor Adventures. While the chinook are certainly appealing, the ice fishing appears to be in its own class as well!

The reservoir's northern pike population is particularly noteworthy, with anglers regularly catching specimens of over 20 pounds. During the winter months, these fish are more accessible as they move into shallower waters under the ice. Ice fishing at Fort Peck requires careful planning due to its size and the potential for rapidly changing weather conditions. However, for those willing to brave the elements and the drive, the rewards can be substantial.

Local guides and outfitters offer ice fishing tours and equipment rentals, which can be particularly helpful for those unfamiliar with the area. The reservoir's remote location also means that anglers can enjoy a relatively undisturbed experience, surrounded by the stark beauty of Montana's winter landscape. The isolation is perhaps one of the major draws to the area - Circle, MT, just southeast of Fort Peck, is the farthest location away from a Starbucks in the contiguous United States.

2. Georgetown Lake

Georgetown Lake, located in the picturesque Anaconda-Pintler Range, is a popular ice fishing destination known for its abundant kokanee, rainbow, and brook trout populations. The lake sits at an elevation of over 6,000 feet, and its high altitude ensures solid ice cover during the winter months. Georgetown has been on my radar as a location to fish since picking up ice fishing - and for great reason.

One of the appealing aspects of Georgetown Lake is its accessibility. The lake is located near major highways, and there are several public access points with ample parking. This ease of access makes it a convenient option for both day trips and longer stays.

Rainbow trout are the primary target for ice anglers at Georgetown Lake. These fish can be found throughout the lake, but they often concentrate around the mouths of tributary streams where they feed on insects and other small organisms. Anglers typically use a combination of jigging and tip-ups to entice the trout, with small jigs tipped with worms or maggots being particularly effective.

In addition to rainbow trout, Georgetown Lake also hosts a healthy population of brook trout. These fish are often found in shallower waters and can be caught using similar techniques to those used for rainbow trout.

Outside of trout, the kokanee salmon bite makes Georgetown an attractive ice fishing location. There is no limit on kokanee and seeing some of the photos others have taken, they do not appear to be in short supply. The lake's consistent ice conditions and reliable fish populations make it a favorite among local anglers.

3. Canyon Ferry Lake

Canyon Ferry Lake, located just outside of Helena, is another top-notch ice fishing destination in Montana. This large reservoir spans over 33,000 acres and is known for its healthy populations of walleye, yellow perch, and rainbow trout.

One of the unique features of Canyon Ferry Lake is its relatively shallow depth, which helps maintain stable ice conditions throughout the winter. The lake's shallow waters also make it an ideal habitat for walleye and yellow perch, which are the primary targets for ice anglers.

Walleye can be found throughout the lake, but they often concentrate around submerged structures such as rock piles and drop-offs. Anglers typically use jigging techniques with lures that mimic small fish or insects to attract walleye. Tip-ups baited with live minnows are also effective for targeting these predatory fish. A recent walleye fishing trip with Mackenzie River Pizza Co. saw us bottom-bouncing for several nice eater-sized fish. It’s reasonable to assume that ice fishing would produce a similar yield.

Yellow perch are another popular target at Canyon Ferry Lake. These fish are known for their schooling behavior, and once a school is located, anglers can often catch multiple fish in quick succession. Small jigs tipped with worms or maggots are the preferred method for catching yellow perch, and the use of electronic fish finders can help locate schools of fish under the ice.

Canyon Ferry Lake's proximity to Helena makes it a convenient destination for both local anglers and visitors. The lake's abundant fish populations and reliable ice conditions ensure a productive and enjoyable ice fishing experience.

4. Lake Mary Ronan

For those seeking a quieter and more secluded ice fishing experience, Lake Mary Ronan is an excellent choice. Located west of Flathead Lake, just outside of Glacier National Park, this smaller body of water offers a peaceful setting. The lake is known for its healthy populations of kokanee salmon and yellow perch.

Kokanee salmon are the primary target for ice anglers at Lake Mary Ronan. These landlocked sockeye salmon are prized for their fighting ability and, of course, delicious flavor. Kokanee can be found throughout the lake, but they often concentrate in deeper waters during the winter months. Anglers typically use small jigs or spoons tipped with maggots or corn to attract kokanee. Electronics such as fish finders can be particularly useful for locating schools of these fish under the ice.

Yellow perch are another popular target. These fish can be found in shallower waters and are often caught using small jigs tipped with worms or maggots. The lake's clear waters and abundant vegetation provide an ideal habitat for yellow perch, and anglers can expect consistent action throughout the winter.

Lake Mary Ronan's scenic surroundings and peaceful atmosphere make it a great destination for those looking to escape the hustle and bustle of more popular ice fishing spots. The lake's relatively small size also makes it easy to navigate, ensuring a productive and enjoyable experience. An opportunity to combine ice fishing, a scenic view and a historic area make Lake Mary Ronan an ice fishing paradise.

5. Hebgen Lake

Sticking with the “lakes close to national parks” theme, Hebgen Lake, located near West Yellowstone, is a renowned ice fishing destination known for its populations of rainbow and brown trout. The lake's proximity to Yellowstone National Park adds to its appeal, offering stunning views and a unique winter fishing experience.

Hebgen Lake is one of the first bodies of water in the region to freeze over each winter, providing early ice fishing opportunities. The lake's large size and diverse habitat support healthy populations of both rainbow and brown trout, making it a favorite among local anglers.

Rainbow trout are the primary target for ice anglers at Hebgen Lake. These fish can be found throughout the lake, but they often concentrate around the mouths of tributary streams and areas with submerged vegetation. Anglers typically use jigging techniques with lures that mimic small fish or insects to attract rainbow trout. Tip-ups baited with live minnows or worms are also effective.

Brown trout are another popular target at Hebgen Lake. These fish are often found in deeper waters and can be caught using similar techniques to those used for rainbow trout. The use of electronics such as fish finders can help locate schools of brown trout under the ice.

Hebgen Lake's stunning winter scenery and reliable ice conditions make it a must-visit destination for ice fishing enthusiasts. The lake's proximity to Yellowstone National Park also provides opportunities for wildlife viewing and other winter recreational activities. The Madison River Fly Fishing episode with The Rainbow Valley Lodge from this past season was filmed just a few miles north of Hebgen Lake. Imagining those picturesque mountains in the winter season with fresh snow would instill a sense of the rugged west in anyone.

Article Categories

Featured Image

Angler

Matt Carey

Article Tags

Path

/articles/five-ice-fishing-destinations-montana

Hot Coho Action

Read more about Hot Coho Action

Body

There’s an old adage that when one door closes another opens. In this age of fishery closures I think it rings very true for anglers. We have limited options, but that doesn’t mean we have no options. Nowhere is this truer than for this falls Puget Sound coho fishery. As any salmon angler around Puget Sound knows, Area 9 is closed for boat angling for coho. Per WDFW, the reason for this action is to protect expected low runs of wild coho and pink salmon returning to the Skagit and Stillaguamish rivers. But right next door, Area 10 is open for clipped coho. This presents a unique opportunity for anglers targeting coho. What is that opportunity you ask?

Area 10 is on fire with coho salmon!

My wife JoAnn and I recently launched our boat out of the Edmonds Marina and instead of turning north, we headed south, toward the oil docks. What we found was some impressive coho action that we certainly did not expect. And reports coming in to our web site, NorthwestFishingReports.com, from other anglers confirms it - this could shape up to be an outstanding year for coho fishing in Area 10. The two days we went out resulted in limits for us, the second day it took just an hour to catch a limit of coho. In the two days we fished we only ran into one unclipped fish. I have a couple theories for our success and also some observations that may help improve your success rate if you fish Area 10.

First, the reason I think this will be an outstanding Area 10 coho fishery. Pretty simple, these fish have hit Area 9 and passed through without being targeted. All those fish that would have been caught as they swung through Area 9 instead got a free pass to head south. (This also bodes well for our terminal fisheries of Lake Washington, the Green River). So anglers in Area 10 are getting a shot at fish that are ready and willing to bite and haven’t seen our gear since they left the Strait of Juan De Fuca. They are growing bigger and more aggressive as they head south to their natal destinations.

What are some of the locations anglers should be targeting? I would say follow the boats, but in this case I’m suggesting you stay away from the boats. Oh, there are the usual haunts to use as starting points. The waters just off the ferry terminal at Edmonds, south to the oil docks, Richmond Beach, Meadow Point, and Shileshole will all produce. On the west side Apple Cove Point (south), Kingston, and Jefferson Head are all well known. In addition, Elliot Bay, but check to make sure it’s open (as I’m typing this it is).

As my wife and I caught our easy limits we watched boats around us. We saw nets coming out and fish being caught in decent numbers. That said, there are a few things you can do to increase your success rate.

First off, as noted above, don’t fish in the fleet.

Coho in the Sound are traveling all over as they make their way south. They will concentrate around points because that is where bait can become concentrated, but in the travel lanes they will be all over. So ask yourself, “do I want to fish with seventy five of my close friends or do I want to move 300 yards away and have the water to myself?” I know how I answer that question. I admit its human nature to hang out in a group. That’s why we live in cities. But when it comes to coho fishing in open water you’ll do just as well and probably better off by yourself. Plus it makes it a lot easy to swing back on these fish as they are not loners. When you catch one you should know there are likely a half dozen swimming along.

Let’s talk about another factor that I think many anglers don’t focus on – speed. A few years back I ran a Go Pro off my downrigger ball to film some underwater coho action. (you can watch this video on our YouTube page, just search for “Puget Sound Underwater Coho” on YouTube). The most striking thing I saw on this footage was the response coho had to getting the flasher to fully rotate.

If the flasher did a wave back and forth or an occasional rotation the salmon would just swim behind and watch. But when the speed increased and that flasher went into full rotation mode it was “game on” as the coho suddenly became more excited with the followers suddenly darting back and forth until one committed and hit the bait. Watching the action I became convinced that speed is critical in improving your success rates on coho salmon. That’s not to say you can’t catch coho trolling slower and many do, but I think you’ll do better going fast. How fast? We troll 3.1-3.3 mph into the tide flow and 3.4-3.9 mph with the tide.

The difference in speed is because trolling into the tide activates your flasher, like pulling a plug in the river, the plug dives easier into the current. Trolling with the flow of the tide means your boat is being pushed along by the tide so you need more speed to activate the flashers into full rotation. The other thing you need is good downrigger clips and to bury them at least three quarters into the clip. Trust me, when a coho hits at 3 mph it will pop the clip in almost every case. There’s nothing worse than clipping too light and having to constantly reset your downrigger. It will cause you to slow down which you don’t want.

In addition to fast trolling my boat has an itroll throttle control on my kicker. I bought it from ifish solution’s Alan Hanna. He sold me on the importance of varying your speed. The unit does a superb job with multiple programmable functions to set automatic speed adjustments. Just set it and go. The two days we got limits I had the itroll set to “bump” the speed up 0.3-4 mph every two minutes for 15 seconds. What this does is give the flasher a rotational increase that can stimulate the coho into a bite if they are in “mesmerized mode”, just following your bait but not biting. The speed variation can be enough to trigger a bite. If you don’t have a throttle controller you can simulate this to some extend by doing s-turns from time to time. Avoid the habit of trolling in a straight line at a constant speed.

As to gear that worked for us, we went with smaller 8” flashers, generic medium-sized hoochies in splatter green/glow, white glow, and army truck. We also had good success with an Arctic Fox Trolling Fly Salmon Series in blue. Leader lengths were 26-28”.

In the past we have had great success fishing deep, down to 90-120 feet on the downrigger cable. With a 3 mph trolling speed the sweep back of the cable would suggest actual depths of 70-90 feet deep. This trip, however, we had no fish finder on the boat so set the downrigger rod at 35 feet first thing in the morning and lowering to 45 feet deep as the morning progressed. We also opted to run a Deep 6 on our second rod out 60 feet, which would put that gear right around 30-35 feet deep. This rod saw the majority of the action. There’s nothing like watching a rod double over and hearing that reel clicker scream!

I hope you have a chance to go out and hit this fishery. The action should be good into early October so there is plenty of time to get your coho. Good luck and stay safe.

Article Categories

Angler

Mike Carey

Article Tags

Path

/articles/hot-coho-action

Fishing Destination Zeballos

Read more about Fishing Destination Zeballos

Body

The scream of the reel as the broad shouldered king salmon took another run was music to my ears. The single action reel handles spun dangerously around as I got my hand out of the way just in time. They don’t call them knuckle busters for nothing and I had learned that painful lesson earlier in the day.

That said, it was a lesson gladly accepted because it meant the fishing action was hot – and indeed it was. Our boat’s fish hold was steadily filling up with the bounty of the ocean in this remote location off Zeballos, on Vancouver Island, British Columbia, Canada.

Ever since I moved to the Pacific Northwest and started going to Sportsman’s Shows, I had the dream of someday fishing a true “destination” fishing location. Wandering up and down the booths, looking at pictures of giant halibut, ling cod, and Chinook salmon, it just got me thinking how much I wanted to try something like this out.

All the maps of far away, exotic places to fish – I wanted to go! But I had other priorities and needs, not the least of which was raising my two boys. They are grown now and moved out of the house, and with a wife encouraging my dreams, my opportunity final came.

We were on the road north to the border crossing as my friends Aaron Borg, Rob Holman and myself began our journey to Zeballos, B.C. Aaron and Rob had driven over the evening before from Spokane and then stayed at my home.

We talked excitedly of the trip and fishing to come. None of us had been out of the country on a fishing adventure quite like this. We had been invited by Northwest Fishing Reports sponsor Adrian O’Connor to come up for a few days and enjoy the fishing and stay at his fishing lodge, Reel Adventures Sportfishing. What can I say? My jaw dropped when Rob had told me we would be traveling to this fishing Mecca in B.C.

Zeballos is a small, remote town located at the end of Zeballos Inlet on the west side of north Vancouver Island, a little more than halfway along the large island. In days past it had been a vibrant town of a couple thousand. A gold rush between 1938 and 1942 produced a boom town, which quickly faded post World War II when the price of gold collapsed.
The town turned to forestry and fish processing. It’s the tourist and sport anglers that come now to visit now, at least, those in the know.

Our crossing at the border was uneventful. Although, I must admit to being taken aback when we told the border officer our destination was Zeballos, and his response was “Are you making that up?” No officer, and please don’t pull us over and empty our vehicle! But he smiled and waved us on. Next stop, was the ferry crossing at Tsawwassen, due south of Richmond (nearby Vancouver). It’s a two hour crossing from Vancouver to Nainmo. The B.C. ferry system is pretty impressive. Large, comfortable ferries, reservations systems (recommended) and good food on board made the crossing a breeze. Not to mention the beautiful scenery and ever closer Vancouver Island in the distance growing our anticipation with every kilometer travelled (hey, we’re in Canada now, eh?).

I had looked at the map of Vancouver Island many times, and in my mind I imagined winding, narrow, gravel, two lane roads, taking forever to reach our final destination. Imagine my surprise when we unloaded in Nanimo and promptly got on a smooth, four lane freeway.

The road to Campbell River was smooth sailing and the miles, er, kilometers flew by. We gassed up Aaron’s truck and had to do some quick and dirty conversions – let’s see, there are about 4 liters per gallon of gas… but the exchange rate is 22% in our favor… so the cost of gas here is – more. But not that much more, so relax, you won’t go broke filling up your vehicle.

From Campbell River the road did reduce to a two lane road, but it was still a nice road to drive and we made good time. Wooded hills stretched out in all directions and signs of civilization were few and far between. Towns composed of a half dozen buildings became the norm.

Finally, there it was, the turn off for Zeballos! Now things began getting interesting. Our paved road became a gravel logging road. Hills gave way to snowcapped mountains as we first climbed, and then descended through the Haihte Costal Range of the Vancouver Island Ranges, a mountain range that extends along the length of Vancouver Island. Creeks and small rivers worked deep and narrow canyons into the hillsides.

The landscape is likely very little changed from a hundred years ago. There are clear cuts here and there, but nothing like what one sees in Washington. Finally, the descent smoothed out, and a few small, worn houses began to appear. Then more, and final we had arrive, destination, Zeballos. We had a scenic nine and a half hour trip from Seattle by car, two hours of which was a ferry ride. Very do-able and not near as strenuous as I had imagined it would be.

Once we arrived, we met Adrian and his staff, and other guests. This was a Northwest Fishing Reports “Get-Together” of sorts as Adrian had given a special discount to our members and had filled up the lodge with them. We enjoyed meeting fellow NWFR members and sharing stories of fishing past and to come. To cap things off, everyone graciously held up dinner for us. We sat down and Chef Jason promptly appeared to introduce our first dish.

What can I say about Chef Jason? A smile seems to be a permanent part of his personality. Always open to conversation and playing the most cool, eclectic music in the background, he truly made coming to dinner an experience in its own right. Not to mention, Jason has his cooking chops down! Our meals were five star affairs every day. From a quick morning breakfast before fishing, to abundant lunch packs, to afternoon snacks, to appetizers and main courses that had us eating ever last bite off my plate, we ate like kings!

We had the luxury of fishing three days with owner/operator Adrian O’Connor. Adrian has fished these waters for a lifetime and knows the best off-shore reefs and underwater humps to fish, not to mention the migratory habits of the Chinook salmon as they flood into this region every year. With four boats in his fleet we learned that hot bites are shared and his boats get on the fish right away.

The waters leading away from Zeballos, Esperanza Inlet, are breathing-taking in its scenery. First explored by the Spanish in 1774, and then Captain James Cook in 1778, it is the traditional territory of the Nuu-chah-nulth First Nation, who inhabited these lands for thousands of years. The inlet was formed by glaciers during the last ice age, and now attracts anglers, kayakers, divers, and hikers to the wilderness area.

Wildlife is everywhere to be seen, including otters, sea lions, bear, cougar, and bald eagles. As we departed the inlet for open waters we scanned the horizon for killer whales (Orca), migrating gray whales, seals, and porpoises. To Adrian’s surprise, however, we instead got to see a pilot whale leisurely swimming along, its large tail fully revealed as it sunned itself.

Once on the open ocean we tolerated the swells and moderate chop until a short time later we reached our anchoring locations. Even though it’s about a thirty mile run to this spot, because most of it is in sheltered waters it’s an easy trip. Adrian quickly set us up on anchor in two hundred feet of water. The plan was to start with halibut, and then after getting our limits troll for salmon.

I believe the term is “easy limits”, and that’s just what we experienced. Within minutes of lowering our bait (salmon bellies), Aaron had the first fish, a giant dogfish. Not what we wanted, but no worries, because in the next hour we pulled up our limits of halibut ranging from 15 to 60 pounds, perfect eating size!

Bigger fish can and will be caught. Adrian reported just the previous week customers having caught one hundred pound-plus sized halibut. They, however, have to go back, as there is a slot limit on these tasty fish. Personally, I was perfectly happy getting my “big” and not having to haul up a hundred pounds of muscular fish only to let it back down. Maybe another time fish…

Adrian pulled anchor and set up gear from trolling Chinook. In Canada the preferred gear is a single action “knuckle buster” reel with a ten foot rod. “These are traditional rod set ups in Canada, you won’t find too many anglers using level winds for salmon”, Adrian explained.

Over the course of the next three days I grew to love this set up – the sporting nature of catching a salmon is greatly enhanced with this gear. With no gear advantage you have to be fast on the retrieve when the fish runs at the boat, and be always ready to remove your hands when they run (or you will have your knuckles “busted”).

Just like the halibut, we managed to catch our daily limits without too much difficulty. The hot gear was a large flasher with either a 5” spoon or a whole anchovy fished “off the deck”. The bite that deep is kind of subdued, but once off and running these kings put up great fights, running at the boat, taking out line, but ultimately joining our halibut for dinner. The big king of the trip fell to Rob, 25 pounds of delicious springer.

“And now for something completely different”. That’s what came to my mind when Adrian informed us Wednesday he was going to take us to some locations to troll for ling cod and bottomfish. “This should be interesting” I thought. He explained “we’ll be fishing a large underwater reef that has a rocky bottom surrounding a sandy bottom. This rocky bottom is habit to smaller fish and octopus, and it draws in the larger fish. It can produce well for ling cod”.

Before we went trolling for bottomfish, we trolled some near-shore, shallow water locations for chinook salmon. What spectacular scenery! The waves crashing into the rocky shoreline and reefs made for some amazing pictures. Not to mention, a huge sea lion standing watch over his domain and eagles flying overhead. Our port rod exploded in short order and I grabbed the rod. This was a nice king! Multiple strong runs gave me a great challenge on the knuckle buster reel and 10 foot rod - I love this set up! The fish eventually weakened and I was able to slide him into the awaiting net. Wow, what a beautiful fish to start the day!

The salmon bite was slow so it was time to head to our next spot and troll up some lings. We used flashers and bait, using downriggers to get the gear down to the bottom, a few feet off the deck in 120 feet of water. Trolling speed was fairly slow, we were going fast enough to keep the flashers wobbling back and forth, but not rotating.

I’d never trolled for ling cod, nor had Aaron or Rob. It didn’t take too long before we were able to recognize the sometimes light tap tap of a bottomfish. Of course, the lings had a more forceful tap tap. And on release from the downrigger clip it was pretty obvious when we had a ling. We worked this productive location for a couple hours, and caught a lot of fish.

A limit for each of us, in fact. But it wasn’t ling cod we were mainly catching. Nope, instead, time after time huge, brightly colored yellow eyes and vermillion came to Adrian’s sharp gaff. As we hit our limit for vermillion, we could have kept fishing this area for lings, however, rather than stress and kill bottomfish that likely would not recover being caught from 120 feet deep, he decided to move us to another, smaller reef location.

It was a good location change! Within seconds of lowering our first rig the rod doubled over. Aaron grabbed the rod and battled in a beautiful 20 pound ling in to the boat. Shortly after, Rob and I got nice lings. Another pass yielded some smaller lings and with that we were done for the day.

Back at the lodge, Chef Jason had prepared another five star meal. We visited with the other Northwest Fishing Reports guests who reported good fishing and bountiful catches. Just another day in paradise!

Traveling to Zeballos from the Seattle area is not nearly the ordeal I had in my mind prior to the trip. The drive is easy and Canada couldn’t be a nicer place to visit. People are so friendly and polite, and we were welcomed everywhere we stopped. As to the fishing, I’d rate it a slam dunk “10”. And not that I like to think in these terms when I fish, but the amount of fish we brought back at the prices you’d pay in the grocery store amounted to easily a couple thousand dollars’ worth of fresh fish, far superior to anything you’d find in a store. Plus, it’s all processed, vacuum sealed, and flash-frozen at the lodge. My family and friends will be eating like kings for the next year, until we get a chance to do it again!

To book a trip with Reel Obsession Sportfishing give them a call at 1-888-855-7335 or check them out on Facebook, or their web site.

Article Categories

Angler

Mike Carey

Article Tags

Path

/articles/fishing-destination-zeballos

Conconully Kokanee

Read more about Conconully Kokanee

Body

Some new products are truly unique, for example, Wiggle Fins. These products create and define new methods and fishing techniques. Other products take a great idea, refine it and make it better. In this category falls a new kokanee fly produced by Arctic Fox Trolling Flies. I had the opportunity to recently tackle test this product on Lake Conconully and came away very impressed. It’s going to be a “go to” lure in my kokanee arsenal.

Denis Peirce, the owner of Arctic Fox Trolling Flies, sent me some flies to try out. He told me they were based on an eighties steelhead fly pattern, the Krystal Bullet. Of course, just making a copy of an old fly is not going to cut it in today’s world of new and innovative kokanee products. Denis knows that, having been in the trolling fly business since 1993.

He knows the industry and, more importantly, he has a wealth of knowledge and information about trolling for game fish. Thus far his focus has been on salmon and trout and he has teamed up with Wiggle Fins to make a phenomenal line up of larger trolling flies. It was a natural evolution with the recent explosion in interest for kokanee that Denis turned his knowledge and expertise to kokanee flies. Hence, his new series of kokanee trolling flies.

My wife JoAnn and I took our annual trip to Conconully to try the flies out. We stayed at our favorite resort, Liar’s Cove on the lower lake. The ambiance is family-friendly and the fishing in Conconully around Memorial Day is off the charts! Both the upper and the lower lakes have excellent trout and kokanee action. The upper lake the past few years has produced the larger kokanee so we decided to start our test there.

We ran four lines, two off downriggers and two off leaded core long lines. Each rig had an Artic Fox Trolling Fly and a dodger in front of it. Leader length ran 8-10”. The flies come without leaders. This is actually something I appreciated. If you’re like me, over time a successful lure gets bit a lot and the leader becomes frayed and needs to be replaced.

Unlike hoochie or spinner rigs, single flies are quite easy to quickly replace the leader. Another option I like is the ability to adjust the leader to conditions. For Conconully we ran 12 pound fluocarbon leader. We ran some flies with no attractor, some with a small spinner blade, and some with a Mack’s smile blade. All rigs had a piece of corn on both the primary fly hook and the trailing treble hook.

We started fishing at a leisurely 8am. The action began slow but gradually began to build. At the start, we caught a fish here, a fish there. I can’t say that there was a significant difference between the flies that had attractors and the flies that were “naked”. We ran the downriggers at 35 and 45 feet deep, chasing meter marks. Last year, the downriggers performed well for us. This year, it was a leaded line show. We eventually reached the point where the action was fast enough that the downriggers got put away and we just ran two rods with leaded lines. We trolled with three colors out, and 60 feet of mono leader, trolling at 1.1 to 1.4, using an itroll from ifish solutions to vary the trolling speeds automatically.

The fish at the upper lake were a plump 14-15” fish, shiny bright. Much to my surprise, later after cleaning the fish I had one hen that spilled mature eggs out. Other than that it was mostly bucks in our bucket. The hotspots for us were up lake of the houses to the narrow north end of the lake. Close to shore, middle of the lake – the kokanee are everywhere right now. Watch out for floating logs and debris. The lake has received more runoff than in past years so there is a lot of debris to avoid.

The Arctic Fox Trolling Flies were an obvious hit with the kokanee. Denis has definitely created an effective series of flies for kokanee.

The Arctic Fox Trolling Flies Kokanee series come in seven different colors. Five are fluorescent chenille and mylar. Denis reports that under UV light these flies are very “hot”, meaning they have excellent underwater color reflection. The two non-fluorescent flies are fire red and purple with silver core chenille. Purple remains visible at depth, while red is one of the first colors to be filtered out by water depth, meaning it turns grey-black at depth. The mylar, however, gives it a nice contrasting UV orange that continues to reflect available light at depth.

With seven color choices you’ll be able to fish whatever conditions you’re presented with, from cloudy Pacific Northwest to bright Central Washington days. You’ll also have a sufficient variety of colors to find what the finicky kokanee want on any given day.
For us the hot set up was without a doubt the orange with 10” of leader and an orange crush wobbler run at three colors out. The fish were just slamming this set up!

One concern I had when first checking out these flies was the size of the hooks. The main fly is tied on a #8 long hook, and the trailing hook is a #10 treble hook. Denis uses gamakatsu hooks and I will be the first to attest that these hooks are sticky sharp! Our experience was that the combination of these two hooks was incredibly effective.

We had few lost fish and noted several that missed the main body hook but were secured by the treble hook. Remember when I started this article and mentioned “refining” the pattern? Well, Denis has taken the treble hook and secured it using a loop of stainless steel leader that creates an articulation for the treble hook that the fish have a hard time throwing. Put another way, the treble hook is free to move around meaning the fish can’t get leverage on it to pull the hook free. I’ve reviewed underwater footage of kokanee and one thing that struck me was that once a kokanee is hooked it does incredible body shakes and spins in a desperate attempt to get away. It’s amazing we catch any of these acrobatic fish at all! Any small edge an angler can have against these wild gyrations will help land more fish. I would say our hook to catch ratio was higher than trips using standard kokanee lures.

JoAnn and I continued to pull in plump, healthy 14-15” kokanee and over the two days of fishing and easily got our limits. I came away very impressed with the Artic Fox Trolling Fly kokanee series. I’m definitely moving it into my first tier of kokanee lures. I like the smaller size profile compared to the majority of the kokanee lures on the market. It gives kokanee anglers an option to downsize when the fish are looking for a smaller presentation. With the articulated treble hook I don’t have any concerns about losing fish due to the smaller hooks.

Give these flies a look see! You can order them online at Arctic Fox Trolling Flies.

Article Categories

Featured Image

Angler

Mike Carey

Article Tags

Path

/articles/conconully-kokanee

Kayak Innovation

Read more about Kayak Innovation

Body

The word “kayak” means “surface” or “top” in the Inuktitut language, a dialect spoken by the Inuit people. The Inuits started paddling around kayaks some 4000 years ago in pursuit of wild game. Today, the kayak market is a rapidly growing industry in the fishing world. Over the past two decades, kayak companies have made giant leaps in bringing new and innovative products onto the fishing scene. These advancements have made what was once just a simple human-powered watercraft, into now, what is a very formidable fishing machine.

Why a kayak and not a traditional fishing boat you ask? There are more than just a handful of reasons why kayak fishing might suit your needs better than a larger vessel. Here are some of the more popular justifications:

Portability. Kayaks are quite easy to move around, and they generally won’t require a trailer. Even my 13 ft Hobie Revolution can be toted on top of a car as small as a Prius with the proper roof rack installed.

Simplicity. Kayaks are the minimalist’s best friend. There's no combustible engine requiring loads of maintenance, fuel, and oil. In a kayak, you are the motor. Now, that’s not to say kayaks can’t start losing some of their minimalistic qualities. There are loads of add-ons, knick-knacks, and even electric motors that can sometimes blur the line between a kayak and a traditional fishing vessels. More on that later.

Maneuverability. Kayaks can get into tight spaces and shallow waters that might not be suitable for larger boats. This is great for things like the seabass fishery, where rockfish like to hang out in shallow kelp beds along the straights of Juan De Fuca or the north coast of Washington state.

Kayaks are work. You heard me right, kayaks are physical work, yet that’s why many of us love them. Getting in a solid workout in your pursuit of fish is part of the appeal for many of us anglers. I can tell you firsthand there’s nothing like landing ashore with a stringer filled with 30 lbs of fish and a body that lets you know you just earned your catch in every way conceivable.

Getting prepped. Winter is a great time to either prep up your current kayak for the not-so-far-off warm season, or to even investigate a new boat if your wallet permits. Let’s take a look at some of the more recent kayak innovations and see which ones might suit your needs for the upcoming fishing season.

Pedal drives

The pedal drive was hands down the most groundbreaking innovation when it was introduced by Hobie around 20 years ago. It tackled one of the biggest issues with kayak fishing, which undoubtedly was having your hands tied up with a paddle instead of a fishing rod. Not only do they allow your hands to be free, but they also allow you to stay at a given location on the water despite it’s current. There's nothing worse than drifting when you don’t intend to and being pushed away from fish or being dragged over a snag point.

There are two main types of pedal drives to consider when choosing a kayak, the one you chose will largely depend on personal preference. The options are the push pedal drive or the rotational pedal drive.

Push pedal drive

The push pedal drive works exactly as the name implies. You push forward with one foot and alternate to the next foot as you move along the water. A few things to keep in mind when using these drive systems. The distance between the peddles and the seat can be adjusted. You’ll want to make sure you have this fine-tuned before putting in a significant number of miles on your kayak. Wrong positioning can lead to undue strain on the knees and leg muscles. Foot positioning is important too.

For example, having your feet too low on the peddles can also lead to excessive strain on the knees. Finally, a fair amount of training on calm waters with little to no current should be done before plunging into fishing adventures that will require you to travel long distances over the water or require you to kayak against strong currents. The goal here is to ease yourself in and build up the muscles required for a type of leg movement that isn’t exactly natural to us.

A big pro about the push pedals is that they use a fin system. This system consists of two flexible fins that move side to side as you peddle. Some of the newer systems have a feature that will allow the fins to flex backward toward the stern of the boat if you were to accidentally get into shallow waters where the fins might otherwise drag and potentially break on the bottom. Fins also hold up well in weeds and kelp and rarely present a significant risk of getting tangled in underwater vegetation.

Rotational pedal drive

If you’re a cyclist or better yet, a recumbent bike cyclist, then you’ll already be familiar with the movements necessary for the rotational pedal drive kayak. This drive system works just like a recumbent bicycle. You sit in the seat of your kayak and peddle in a rotational motion mimicking the movement of what you would find on a bicycle crank. These pedal drive systems are favored by some kayakers as this is a movement that we are typically a bit more familiar with, however, some argue that the efficiency of the rotational system is lacking when compared to the push drive systems. Another thing to consider is that rotational systems use a prop for propulsion as opposed to a fin system. Props are prone to tangles with weeds and kelp, so the angler running one of these systems should be cautious of underwater obstacles like these.

Backing up

Both push and rotational drive systems offer reverse as an option. However, these come at a cost. Many of the cheaper peddle kayaks don’t offer a reverse option, so this is a factor to consider when shopping around for a kayak.

Rudders

All peddle drive kayaks come with a rudder to control the left and right movement. Instead of using your paddle to turn, you will use a lever (typically to your left) that will allow you to direct your boat.

Integrated transducer mounts

Traditionally, if you wanted to mount a transducer on your kayak for your fish finder, you’d have two options. The first option would be to either buy (or rig up) a transducer mounting arm that will mount to the rail of your kayak and run down the side and into the water. This works, though it creates drag in the water and could get in the way of your fishing. The second option would be to mount a transducer inside your hull at the bottom. The transducer would need to be encapsulated in something like plumbers’ putty and then fixed to the bottom plastic of the hull. This creates an airtight environment for the transducer and allows the signal to be emitted uninterrupted into the water. Both options work yet are not ideal.

Integrated in-haul transducer mounts eliminate these cumbersome and sometimes difficult-to-install systems. These integrated mounts provide predrilled holes with a fixed path for your wires to travel from the fish finder monitor at the top of the boat, down through the hull, and then to a protected compartment at the bottom of the kayak. Here the transducer itself is submerged in the water yet protected by a plastic plate that keeps it from getting banged up by underwater objects.

Increased buoyancy and standup-ability

Kayaks that have stand-up ability aren’t necessarily a new concept, yet it is a concept that is being more widely integrated into peddle kayaks and kayaks that are electronic motor compatible. These kayaks typically have increased hull buoyancy and hull width to allow the operator to stand up while fishing. Some are built with an open deck to increase the surface area for your feet while standing. Standing up provides a great advantage while fishing by allowing the angler to have better positioning for site fishing and affords a significant amount of increased comfort by allowing the angler to stretch their legs and move to new positions.

Electronic motors

Finally, we get to electronic motor drives. This is where we see the line between traditional fishing boats and kayaks start to get fuzzy. “Human-powered watercraft” is the term that has traditionally defined the kayak. Integrating an electronic motor certainly moves us away from that category, but still, the convenience of electronic motors is appealing to anglers who want their focus to be on fishing and not on peddling or paddling.

Motor-compatible kayaks have a few options for mounting the motor, and that will be determined by your specific kayak. Generally, the options for mounting are the stern, the bow, or a couple of feet aft of the seat in the same port your peddle drive would normally sit in. Steering is achieved by either a motor tiller or a steering lever that controls a rudder.

Motor-compatible kayaks are built to support the weight of the motor, the batteries, the angler, and his or her gear. This means they are generally larger and heavier than your standard fishing kayak and more often than not, they will require a trailer to be transported to and from your fishing grounds.

Pulling a trailer for a kayak? Why not just get a regular boat? Well, that’s a valid question and is why I personally stick to kayaks that can be thrown on top of something as small as a Subaru outback. However, If you’re ok with charging and relying on batteries, you don’t mind using a trailer, and are ok with the extra volume and weight you’ll have to tote around, then motorized kayaks might work for you.

Spring will be here sooner than you expect, and hopefully, this info will inspire you to look at some of the many options out there in the kayak fishing world. Remember, the best way to beat the crowds is to get away from them. Peddling (or paddling) your kayak out into the open water will allow you to do just that.

Article Categories

Boating